Description
BWI Eagle, 10-7135, Proximity Sensor, General Mount with 50′ Cable and Connector
Features:
- The Eagle Proximity type sensor senses a target as it approaches the internal oscillator coil encapsulated in the sensor head.
- When the target approaches the front of the coil, this causes a decrease in the amplitude of the internal oscillator.
- This damping effect can be sensed at any RPM, thus the sensor can be used to sense speeds below 1 RPM and as high as several thousand RPM’s.
- Because this type of sensor is not sensitive to the speed of the targets, the sensing distance remains approximately 1/8″ at any speed.
- This eliminates “missed” targets as monitored speed changes
The Eagle® Proximity Sensor is designed to measure signals from any rotating apparatus and transmit this information by low-voltage 2- conductor twisted pair cable back to an Eagle control unit located up to 2 miles away. This sensor’s inductive proximity technology is further enhanced with additional circuitry to reduce or eliminate the adverse effects of electrical noise. This sensor can easily be identified by its bright orange end-cap(s).
For more information, please see Data Sheet
| Dimensions | 4.12 in. x 1.32 in. O.D. |
| Sensor Type | Inductive Proximity (Metal) |
| Housing / Mounting | PVC / General Mount |
| Sensor Power Requirement | Current Limited 12VDC from Control |
| Unit Sensor Cable | Unshielded Twisted Pair 16/2 – 50 Ft. with Connector |
| Distance | Sensor to Control Unit – 2 Miles |
| Operating Temperature | Range -40° C to 145° C / -40° F to 293° F |
| Sensing Speed Range | Less than 1 RPM to 6000 RPM |
Reviews
There are no reviews yet.